How to reset the Administrator Password for Plesk?

If you lost your Plesk Administrator Password, you can reset this with an SSH or Remotedesktop-Connection.

For Linux:

If you lost your password for your Parallels Plesk Control Panel. You can reset the password via SSH with an SSH client of your choice. When you are connected use this command:


/usr/local/psa/bin/init_conf -u -passwd <new_password>


Please Replace " <new_password> " with your new Admin-password.

For Windows:

Connect via an Remotedesktop-Connection to your server and open up the commandpromt (Start > „cmd“ [Return]) and use the following command:

"%plesk_bin%\plesksrvclient"<new_password> -set <new_password> true

Replace it with the desired Admin-Password.

Byla tato odpověď nápomocná?

 Tisknout tento článek

Také čtěte

Plesk

https://docs.plesk.com/en-US/12.5/

IPv6 (Internet Protocol Version 6)

he old IPv4 protocol supports 4,3 billion addresses for the world wide web. IPv6 was developed by...

How can I configure my virtual machines using hostroutes?

Example configuration In the following examples we assume that the following IPs are used: IP...

Root Password reset via Rescue (Linux)

To reset your root users password via the rescue mode, follow this instructions:1.) Set your...

How to install an own operating system image without a hardware KVM over IP?

If you want to install an own image, for example to prepare your own partition set, you can do...

Powered by WHMCompleteSolution