How to reset the Administrator Password for Plesk?
If you lost your Plesk Administrator Password, you can reset this with an SSH or Remotedesktop-Connection.
If you lost your password for your Parallels Plesk Control Panel. You can reset the password via SSH with an SSH client of your choice. When you are connected use this command:
/usr/local/psa/bin/init_conf -u -passwd <new_password>
Please Replace " <new_password> " with your new Admin-password.
Connect via an Remotedesktop-Connection to your server and open up the commandpromt (Start > „cmd“ [Return]) and use the following command:
Replace it with the desired Admin-Password.
آیا این پاسخ به شما کمک کرد؟
در همین زمینه
To reset your root users password via the rescue mode, follow this instructions:1.) Set your...
he old IPv4 protocol supports 4,3 billion addresses for the world wide web. IPv6 was developed by...
Example configuration In the following examples we assume that the following IPs are used: IP...
When using a software RAID, it is necessary to check for proper functionality, since in case of...
If you want to install an own image, for example to prepare your own partition set, you can do...
Powered by WHMCompleteSolution