How to reset the Administrator Password for Plesk?
If you lost your Plesk Administrator Password, you can reset this with an SSH or Remotedesktop-Connection.
If you lost your password for your Parallels Plesk Control Panel. You can reset the password via SSH with an SSH client of your choice. When you are connected use this command:
/usr/local/psa/bin/init_conf -u -passwd <new_password>
Please Replace " <new_password> " with your new Admin-password.
Connect via an Remotedesktop-Connection to your server and open up the commandpromt (Start > „cmd“ [Return]) and use the following command:
Replace it with the desired Admin-Password.
Var dette svaret til hjelp?
Les også disse
Our rescue system is compareable with Debian. Any basic Linux commands can be used. Activate...
If you want to install an own image, for example to prepare your own partition set, you can do...
To reset your root users password via the rescue mode, follow this instructions:1.) Set your...
Example configuration In the following examples we assume that the following IPs are used: IP...
Powered by WHMCompleteSolution